When a furnace stops working on a cold night, or an air conditioner quits mid-summer, the call that needs to happen is the one that gets somebody out quickly. Burnsville homeowners, landlords with tenants to answer to, and business owners who cannot let a building go uncomfortable all need the same thing: a technician who shows up, diagnoses the problem, and fixes it. That is what Clear Skies Heating and Air handles across Burnsville and the surrounding Dakota County area.
We work on the full range of residential and commercial HVAC: furnace repair and replacement, air conditioner service, heat pump installation and repair, ductwork, thermostats, indoor air quality, and seasonal maintenance. Same-day HVAC service is available, and we are reachable every day from 8:00 AM to 11:00 PM. When you call us, you reach the people who actually show up.
Burnsville carries a mix of housing stock and commercial properties, and the calls we take reflect that. A newer home with a high-efficiency furnace and a smart thermostat raises different questions than an older split-level where the ductwork has never been properly balanced. A small commercial building with a rooftop unit has different demands than a single-family rental where the tenant noticed the heat was running but the house was not warming up. The work varies, and so does what a visit covers.
The most common call is a system that is not doing what it should. The furnace is blowing cold air, the AC is running but the house is not cooling, or the equipment is making a noise it was not making last week. We start with a full diagnostic before recommending anything. That means checking the actual fault rather than guessing at it, explaining what we found in plain terms, and giving a clear picture of what the repair involves before any work starts. Work is performed by qualified HVAC technicians who know the difference between a fault that is worth fixing and one that points toward a larger problem.
A system that is working today may not be working in January if nobody has looked at it. Pre-season furnace tune-ups and AC maintenance visits catch the things that become emergencies later: a heat exchanger showing early wear, a refrigerant charge that is slightly low, a blower motor that is pulling more current than it should. Seasonal maintenance is available for both residential and commercial properties, and it is the most straightforward way to avoid a no-heat call in the middle of a cold stretch.
Some calls end with a repair. Others end with a conversation about whether the system is worth putting more money into. When a furnace or air conditioner has had repeated faults and the cost of the next repair approaches what a replacement would realistically cost, we say so. We give honest recommendations on repair versus replacement, never an upsell. When replacement is the right answer, we handle the full installation, sized correctly for the space it serves.
The service page carries a full breakdown of what each type of job covers. Call us to talk through what your system is doing and we will tell you what makes sense.
Same-day HVAC service is available for both emergency and non-emergency calls. When a furnace or air conditioner has stopped working entirely, we treat it as the urgent situation it is. You get the appointment confirmed when you call, not a vague window that leaves you guessing. We are available every day from 8:00 AM to 11:00 PM, which covers most of the situations that come up.
A rental property with a tenant who has no heat is a different kind of call than a homeowner scheduling a tune-up. We understand that access needs to be coordinated, that tenants may not be home during standard hours, and that a commercial property often cannot shut down a space to wait for service. When you call, tell us what the situation involves and we will work through the scheduling details with you. The goal is getting the system handled without disrupting the people using the building.
Don't let a small problem turn into a no-heat night or a no-cool afternoon. The sooner you call, the sooner your comfort is back.
The cost of an HVAC job depends on what the fault turns out to be, what needs to be accessed to fix it, and whether the right answer is a repair or a replacement. A straightforward thermostat fault is a different job than a refrigerant leak that requires tracing and sealing before a recharge makes sense. A furnace repair on a unit with accessible components is a different scope than pulling and replacing a heat exchanger. Those variables are what move a quote, and we do not know the final number until we know the fault.
What we can tell you on the call is what the diagnostic covers and what the visit will cost before a technician is dispatched. You get the rate confirmed before anything is scheduled, and we walk through what it includes. Ask what the quote covers and you get a straight answer. We do not offer a free estimate, but we do give you a clear picture of what you are agreeing to before the work starts.
Fair price each visit. Clear scheduling each visit. Code-compliant every time.
A heat pump that is icing over in cold weather or failing to defrost correctly is not always a sign the unit is failing. The defrost cycle is a normal part of how a heat pump operates in low outdoor temperatures, but a fault in the defrost controls, a refrigerant issue, or a sensor problem can cause the system to ice up in a way that stops it from heating effectively. We diagnose the root cause rather than resetting the system and leaving.
Installing a central air conditioning system involves more than setting the outdoor unit. The equipment has to be sized for the home's actual cooling load, the refrigerant lines and low-voltage controls have to be correctly run, and the system has to be commissioned and tested before the job is done. HVAC work sized and installed the way the manual calls for is what actually delivers the efficiency and comfort a new system is supposed to provide. We handle the full installation scope.
Rooftop units serve a lot of the small commercial buildings in Burnsville, and they have their own service requirements. Access, weatherproofing, and the condition of the curb and ductwork connections all affect how a rooftop unit performs and how long it lasts. We service and replace rooftop units for small commercial properties, and we handle the diagnosis when a unit is not conditioning the space the way it should.
A cracked heat exchanger is a safety issue, not just a performance issue. Combustion gases that should stay inside the exchanger can enter the airstream and circulate through the home. Heat exchanger inspection is part of a thorough furnace tune-up, and it is worth requesting specifically on older equipment or any time a furnace has been flagging a fault code related to overheating or pressure. We'll find the fault and set it right.
An air conditioner or heat pump that is low on refrigerant is not a system that just needs a top-off. Refrigerant does not deplete on its own, so a low charge means there is a leak somewhere in the system. We locate the leak, repair it, and then recharge the system to the correct level. Skipping the leak diagnosis and recharging anyway is a short-term fix that leaves the underlying problem in place.
An AC that will not start is often pointing to one of a handful of faults: a failed capacitor, a tripped disconnect, a control board issue, or a compressor that has seized. We run through the diagnostic systematically rather than replacing components at random. Once the fault is identified, we explain what it is and what the repair involves before any work starts. One call, and a technician is on the way.
Landlords and property managers working in Burnsville call us for the same reasons homeowners do, but the logistics are different. The tenant notices the problem, the landlord gets the call, and then access has to be arranged around whoever is living in the unit. We work through that coordination when you schedule. You tell us what the access situation looks like, and we confirm the plan before the visit so nothing gets delayed on the day.
Invoicing can go to the property owner or the management company, depending on how you want it handled. For landlords managing more than one property, we can discuss how to set up service calls across multiple addresses. The goal is getting the system handled correctly and getting the tenant back to comfortable without making the scheduling harder than it needs to be.
We'll service the system and clean up after.
the system service rundown explains the range of work covered.
We serve Burnsville and the surrounding Dakota County area, including Apple Valley, Savage, Bloomington, Lakeville, and Eagan. Whether the call is coming from a homeowner in Burnsville or a property manager with a unit in Lakeville, the process is the same: call, confirm the address and the situation, and we get a technician scheduled. If you are not sure whether your address is covered, call and ask. We will confirm it on the spot.
Most diagnostic visits take less than an hour for a straightforward fault. A more complex situation, or one where the cause is not immediately obvious, may take longer. We do not rush a diagnosis to meet a time target, because a misdiagnosis costs everyone more in the end. The technician will give you a sense of the timeline once the inspection is underway.
We clean up after the work is done. Equipment packaging, old parts, and any debris from the job are removed, and the area around the equipment is left the way we found it. If the job involves cutting into walls or ceilings for ductwork, we discuss what that involves before starting.
Most modern smart thermostats are compatible with a wide range of HVAC equipment, but compatibility depends on the system's wiring and control configuration. We check compatibility before recommending or installing a control, and we let you know if the existing wiring needs any adjustment to support the new thermostat.
No. We give honest recommendations on repair versus replacement based on the age of the equipment, the nature of the fault, and what continued repairs would realistically cost. If a repair makes sense, we say so. The goal is the right answer for your situation, not the answer that generates the larger invoice.
If the system is making loud or unusual noises, or if it is producing a burning smell, switch it off and leave it off until the technician arrives. If the system is running quietly but not performing correctly, leaving it running is generally fine. When you call, describe what the system is doing and we will advise you on the spot.
Sometimes, depending on the fault and the equipment. If a part needs to be ordered, the technician will tell you what, if any, interim options exist for keeping the space livable while you wait. We do not leave a customer without a plan, and we explain the situation clearly before the visit ends.
As far ahead as you need. Booking in advance is a good idea, particularly before the heating or cooling season when demand peaks. Call to discuss what you need and we will confirm availability and put a date on the schedule.
A tune-up on older equipment can still be worthwhile, because it tells you clearly where the system stands and what, if anything, is close to failing. That information helps you plan, whether the outcome is a repair, a replacement, or simply confirmation that the system has more life in it. We give honest recommendations based on what we find, not on what generates more work.
Yes, and it is worth doing. A thermostat set to the wrong mode or a tripped breaker is a fast fix that does not need a service call. If you check both and the system still is not responding, that is when calling us makes sense.
Clear Skies Heating and Air takes HVAC calls across Burnsville every day from 8:00 AM to 11:00 PM. A system that has been running short, heating unevenly, or struggling to reach temperature is not going to fix itself before the next cold stretch. Call (612) 665-6289 for a quote and find out what it actually takes to get the system right.
Fast diagnosis. Honest pricing. Comfort restored.
We serve these towns nearby as well: Eagan, Richfield, Edina. See our list of towns.
Every heating and cooling job is different, and so is every home or building we work in. The table below breaks down what each service covers, who it fits best, and one practical thing worth knowing before you call. If a service is not listed or your situation does not fit neatly into a category, call us and we will talk through what makes sense for your setup.
| Service | What's Included | Common Needs | Helpful Details |
|---|---|---|---|
| Furnace Repair & Replacement |
| Burnsville homeowners dealing with a furnace that has stopped working or is no longer keeping up | Sub-zero temperatures make furnace failure an emergency. We give honest recommendations on whether repair or replacement makes more sense for your situation. |
| Cold-Climate Heat Pump Installation |
| homeowners weighing a heat pump against a furnace replacement or adding zone heating to a space without ductwork | Modern cold-climate heat pumps are rated to operate efficiently down to roughly -15 degrees Fahrenheit, which covers what Burnsville winters actually deliver. |
| Emergency HVAC Service |
| any situation where the heating or cooling system has stopped and waiting is not an option | We are reachable every day from 8:00 AM to 11:00 PM. Describe what the system is doing when you call and we move quickly. |
| Heat Pump Repair & Service |
| homes and commercial spaces running a heat pump as the primary heating and cooling source | Minnesota winters stress heat pump defrost cycles hard. A technician who knows cold-climate systems makes a real difference. |
| Ductwork Repair & Sealing |
| homes with rooms that never reach the right temperature or systems that run constantly | Conditioned air escaping into attics or crawl spaces is one of the most common sources of high energy bills in older Burnsville homes. |
| Heating Repair & Service |
| any property with a heating system that is underperforming or not starting | Work is performed by qualified HVAC technicians who diagnose the root cause before recommending any repair. |
| Indoor Air Quality & Air Filtration |
| households that seal up tight in winter and want cleaner air circulating through the heating season | Minnesota homes run sealed for months at a time. Air filtration integrated with the HVAC system addresses the whole house, not just one room. |
| Thermostat & Smart-Control Installation |
| anyone who wants better control over comfort or suspects the thermostat is causing HVAC problems | A thermostat that is not reading correctly can make a perfectly good system behave like a broken one. |
| AC Repair & Service |
| homeowners or building managers whose AC is running but not cooling | Catching a refrigerant leak early prevents compressor damage that costs far more to fix later. |
| Full System Installation & Replacement |
| homeowners replacing an aging or failed system before or during a season | Getting the load calculation right from the start is what keeps a new system from short-cycling or running constantly. |
| Whole-Home Humidifier Installation |
| homes with forced-air heating where dry air is causing discomfort, static, or damage to wood floors and furniture | A whole-home humidifier integrates with the existing HVAC system and treats the entire house, not just a single room. |
| Seasonal Maintenance & Tune-Ups |
| homeowners, landlords, and property managers who want to avoid emergency calls | Scheduling furnace maintenance before the heating season and AC maintenance before summer is the most cost-effective way to keep a system running. |
Call (612) 665-6289 for a quote or to talk through which service fits your situation, and we will give you a straight answer before anything is scheduled.
(612) 665-6289