Property managers in Edina deal with a specific kind of pressure: a system goes down in a unit, the tenant calls, and the window to get it resolved is short. The homes here tend to be well-maintained and the equipment is often mid-range to higher-end, but that does not make a failed furnace any less urgent in January. We handle heating and cooling for residential and commercial properties across Edina, from a single repair call to a full system replacement, and we work around the schedules of the people who live and work in the space.
For landlords and building contacts managing more than one property, the call is the same regardless of how many units are involved. Scope the job, confirm the price, get it on the schedule. We cover Edina and the surrounding area every day from 5:30 AM to 9:30 PM.
Call (612) 665-6289 and the call is answered by someone who knows the trade and can talk through what the system is doing before anything is dispatched.
Some spaces in a home or building simply cannot be served well by the central system. A finished basement that was added after the original ductwork was laid, a garage conversion, a sunroom, or an upper-floor room at the end of a long duct run are all candidates for a ductless mini-split. The indoor head mounts on the wall and connects to the outdoor unit through a small line set, with no ductwork required. Heating and cooling both run through the same unit.
A mini-split works well anywhere the central system cannot reach efficiently, or where the occupant wants independent temperature control. A home office that runs warmer than the rest of the house, a rental unit in a finished lower level, or a commercial space with an occupancy pattern that does not match the rest of the building are all situations where a separate system is easier than rerouting ductwork.
The region's winters matter when selecting a heat pump or mini-split. Cold-climate equipment rated to operate at temperatures well below freezing is what works here. A standard heat pump loses efficiency as outdoor temperatures drop, but cold-climate models maintain meaningful output through the sustained cold stretches that are common in this part of Minnesota. We match the equipment to the load and the climate, not just to the room size.
When a property has no heat, the call goes straight to someone who can scope the problem. We are available every day from 5:30 AM to 9:30 PM, and emergency no-heat and no-cool calls are treated as the priority they are. The job gets talked through on the phone so we understand what the system is doing before anyone arrives, and the price is confirmed before the visit is scheduled.
For non-emergency work, scheduling is straightforward. Call, describe what the system is doing, and we work out what the visit needs to cover. If you are managing a rental property and need to coordinate around a tenant's availability, or if the property is occupied and the timing matters, that conversation happens on the call. We'll get the repair scoped and scheduled.
A quote depends on what the job actually involves. The fault the diagnostic turns up, what has to be accessed to reach it, and whether a repair or a replacement makes more sense given the system's age and condition are the things that move the number. A refrigerant leak on an older system is a different conversation from the same leak on a unit that is two seasons old.
When a system has needed the same repair more than once, or when the cost of a repair is approaching what a replacement would run, we give honest recommendations on repair versus replacement, never an upsell. The right answer depends on the system's actual condition, not on which option costs more. We walk through both before anything is scheduled.
Call and describe what the system is doing. We scope the job on the phone and confirm the price before a technician comes out. You find out what the visit covers and what it costs before anything is booked. That applies to repair calls, tune-ups, and full replacements alike.
Know the price. Know what the visit covers. Know what comes next.
A retail space, a medical office, or any commercial property where the doors stay open during business hours needs a different approach to HVAC work than a vacant unit does. We work around operating hours where the job allows it. Early morning availability from 5:30 AM gives some flexibility before a business opens, and some repair and maintenance work can be staged so the most disruptive part happens outside peak hours.
Not every job can be split across visits, but when it can, we talk through what that looks like on the call. A commercial system that needs a coil cleaned or a control board replaced does not always require the building to be closed, and we scope the work with that in mind. If you manage a building where continuous operation matters, let us know when you call and we will work through what the schedule allows.
A system that runs without reaching the set temperature is usually dealing with a refrigerant charge problem, a dirty evaporator coil, or an airflow restriction somewhere in the duct path. Evaporator coil cleaning and refrigerant diagnosis are part of a standard service call. If the system is oversized or undersized for the space, that is a different problem, and one that a repair alone will not fix.
Seasonal maintenance scheduled around your calendar means the system gets checked before the heating or cooling season puts it under full load. A furnace tune-up covers the heat exchanger, the burner and ignition system, the blower, and the filter. An AC tune-up covers coil condition, refrigerant charge, and electrical connections. Catching a marginal part in October costs less than a no-heat call in January.
A furnace that will not ignite, one that runs but pushes cold air, or one that cycles on and off without completing a full run each points toward a different part of the system. The ignitor, the flame sensor, the control board, and the heat exchanger are all in the diagnostic path. Whoever comes out knows the systems these homes use. We work through the fault before quoting the fix.
A burning smell at startup can point to dust burning off the heat exchanger at the beginning of the season, or it can indicate something more serious like an overheating blower motor or a component that is failing. A musty smell usually points to biological growth on the evaporator coil or in the duct path. Neither should be ignored. Turn the system off and call, and we will talk through what you are noticing before the visit is scheduled.
A replacement visit starts with sizing the new equipment correctly for the space. An oversized system short-cycles before it has a chance to condition the air properly. An undersized one runs constantly and still cannot keep up. We confirm the scope and the price before the installation is scheduled, and the work is matched to the manufacturer's specification.
A heat pump that stops heating in cold weather is often dealing with a defrost cycle that is not working correctly, a refrigerant issue, or a reversing valve that is not switching the system between modes as it should. The defrost cycle is what keeps the outdoor coil from icing over in cold weather, and when it fails the system loses capacity quickly. We diagnose the refrigerant circuit, the reversing valve, and the defrost controls as part of a heat pump service call.
We take calls from across Edina and the surrounding communities in Hennepin County. Neighboring cities including Hopkins, Richfield, St. Louis Park, Bloomington, and Minnetonka are all within our service area. If your property is nearby, call and we will confirm coverage for your address.
We're ready to get your heating and cooling running again. Callers from Edina often look at the HVAC service list before they call.
Yes. A system that has never had a maintenance visit has accumulated wear on components that a tune-up would catch, and the coils and filter are likely due for attention. The longer a system runs without a check, the more likely it is that something small has developed into something larger. Call and we will talk through what a first visit should cover.
We work on residential homes, rental properties, and commercial spaces across Edina. That includes single-family homes, multi-unit buildings, and commercial properties where the system serves a space that stays occupied during business hours. The process is the same regardless of property type: scope the job on the call, confirm the price, and schedule the visit.
A rattle often comes from a loose panel, a failing blower wheel, or debris in the system. A squeal is more commonly a bearing or a belt that is worn. Neither is something to run the system through and hope it resolves, because both tend to get worse and can lead to a more significant failure. Call and describe what you are hearing and we will talk through what it is likely to be.
Yes. Keeping pets away from the work area is helpful for their safety and for the technician's ability to work without interruption. This is especially true when the system is being run through diagnostic cycles or when refrigerant work is being done.
It does. The model number is usually on a label on the equipment itself, and the age can often be read from the serial number. Having that information ready when you call helps us scope the visit and, in a replacement conversation, gives us a starting point for equipment selection. If you cannot find it, that is fine, the technician will locate it on arrival.
Older homes often have systems that have been repaired more than once, or ductwork that was never sized for the way the space is actually used. A system's age and repair history both belong in the repair-versus-replacement conversation, and we walk through both before anything is scheduled. If the duct path is part of the problem, we look at that separately from the equipment itself.
A whole-home humidifier installation is often scheduled alongside a furnace tune-up or a heating repair visit, since the humidifier mounts to the supply plenum and connects to the furnace control board. It is a natural pairing for the regional climate, where forced-air heat pulls moisture out of the air through the heating season. Call and we will talk through whether the timing works with whatever else the system needs.
Yes, and that is the right time to do it. A pre-season check catches problems when the system is not under load and the stakes are lower. A furnace that has not run since spring and an air conditioner that has been off all winter both benefit from a look before the first day they are really needed.
When something goes wrong with a heating or cooling system, the last thing that helps is a form submission and a wait.
Call (612) 665-6289 and the call is answered directly, every day from 5:30 AM to 9:30 PM.
The job gets scoped on the call, the price is confirmed before anything is scheduled, and there is no queue to join before someone looks at what the system is doing.
Reach out and we will talk through the symptoms.
We also take heating and cooling work in: Hopkins, Richfield, St. Louis Park.
Heating and cooling work covers a wide range of jobs, and knowing what each service involves helps you make the right call before anything is scheduled. The table below lays out what we cover, who each service fits best, and a practical note worth knowing before you call. Pricing is confirmed after the job is scoped, so call us and we will walk through what applies to your system and your property.
| Service | What It Covers | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Cold-Climate Heat Pump Installation |
| Edina homeowners looking to add or replace a heating system with modern cold-climate heat pump technology | Modern cold-climate heat pumps are rated to operate efficiently well below freezing. State and utility incentive programs have made these a fast-growing upgrade in this region. |
| Full System Installation & ReplacementMost Popular |
| Homeowners or property managers facing a system that is beyond repair or no longer sized correctly for the space | Matching equipment to the actual load of the space matters more than matching the old unit's tonnage. An oversized system short-cycles and never fully dehumidifies. |
| Heating & Furnace Repair |
| Any property where the furnace is not igniting, is blowing cold air, or is cycling on and off without completing a full run | In a Minnesota winter, a furnace that short-cycles or fails to ignite is an urgent call. We scope the job on the phone so the visit is focused from the start. |
Call (612) 665-6289 and we will talk through what your system needs, confirm the price before anything is scheduled, and get the work on the calendar.
(612) 665-6289